News
Miles platts are pleased to offer the additional products to our 98 / 99 catalogue
EI.41 x 11 SDS (VM0950) fitted with 12 (2x6) 0.635mm Square wire pins And drop-over cover / box (VM0951).
EI.42 x 11 Low Profile Double Section (N42112) - Box not available.
EI.48 x 27mm SDS Bobbin (M03350), bobbin with diagonal terminal strips (M03350D) and the standard version with one terminal strip turned at 90 degrees (M03360). A full insulation cover is available (M03370).
EI.96 x 45.7 S/S (M09705) D/S (M09805) & S/D/S(M09905) Bobbins with modified terminal strip which gives better terminal retention when using "fast-on" terminals.
Large Metric Range :- A new range of bobbins are now available (for use in single & three phase) in sizes from EI.84 to EI.240 and UI.60 to UI.300 with various stack heights. Accessories for these new ranges include Terminal blocks, Portal clamps, core bolt insulation bushes and winding profile spacers. Printed information, Flyers and catalogues are available upon request.
EI.100 x 2" (29 x 2") S/S (VM0785), D/S (VM0786) & SDS Bobbins - this bobbin has one terminal strip which accepts TBS-509 Terminals. A full insulation cover is available (VM0782) an alternative cover is also available which can be fitted with 2 x TBS-509 Terminals.
638 Type (L Range) bobbins are now available with Double Sections
ETD34 8 Chamber Vertical Bobbin (FD9648-FGN-NAT) Fitted with 14 pins.
ETD59 Horizontal (FD7050-FR3-BLK) - Introduced to the ETD range last year.
ETD54 Horizontal (FD7040-FR3-BLK) - This component is currently being tooled, samples should be available by 20th October 2000.
Flying Lead concept for the A Range Bobbins - Miles Platts introduce a new fly lead termination concept for the A-Range bobbins. This method of Termination has been developed to speed up manufacturing times where internally connected fly leads are required to prevent live terminals being exposed within the equipment panels. This is a standard requirement in fire and security alarm panels although fly lead termination is used in many different types of applications. Savings in the cost of twisting, soldering, insulating and anchoring methods are easily achieved. Bobbin sizes currently available are 35 x ¾", 29 x 1" and 29 x 1 ¾", a modified full insulation cover is also available.
A Flyer explaining this concept more fully is available from Technical sales.
EF16 Horizontal Bobbin (FE0047) fitted with 14 Pins.
EF20 fitted with 16 pins (FE0072-FGN-NAT) - this bobbin has staggered pin positions.
EF 20 Concentric Bobbin (Primary and Secondary bobbins) - Please request details from our sales office.
E25 x 19 x 6 (F1238) Single section bobbin with Slot & Pip (FE0132-FGN-NAT) fitted with 10 (2x5) 0.8mm Square wire pins.
E65/32/27 Single Section Bobbin fitted with 16 (2x8) Square wire pins (FE0300-FGN-NAT) also available with a slotted cheek (FE0310-FGN-NAT).